Manufacturers of washing machines produce sophisticated electronic devices with many features that make life easier for their owners. They can do everything - do a quality wash, steam laundry and dry clothes. However, “smart” units remain defenseless against hard and rusty piped water.
How to prevent damage to the home helper? This question is asked by many owners and potential buyers of washing machines. One of the effective methods is to mount a filter for the washing machine, which protects the working components of the equipment from premature damage.
We will figure out what types of filter elements exist, what are the features of their selection, installation, use and maintenance. The above information will help organize comprehensive protection of the washing machine and extend the life of expensive equipment.
The effect of untreated water on the details of the washer
Rumor has it that the washer can function smoothly without any filters for many years. However, in modern realities this is far from the case. The reason for this is various impurities that pollute the water. What can they be?
Mechanical impurities (dirt, sand, small debris), if they are not removed, the internal cleaner can substantially clog over time. The pressure that is necessary to start the water will gradually drop, which can cause a pump breakdown, and the device will stop collecting water.
Rust detrimental to the result of washing, because things fade, acquire new spots or do not wash off at all.
If you do not timely clean the water filter in the washing machine, the cleaner will become clogged. And this can cause damage to the machine
Hard water poses no less danger. When heated, mineral deposits from the water settle on the heater and the walls of the apparatus in the form of impenetrable scale. And this can provoke an increase in energy consumption for heating water to the required temperature.
It is necessary to remove scale in a timely manner, otherwise a more serious breakdown is possible, requiring expensive repairs. For maintenance of the washer periodically it is necessary to use an anti-scale.
In addition, hard water provokes corrosion - it is it that is the key reason for the rapid wear of important parts and reduce the life of the machine.
Also, untreated water often becomes a decisive factor in the depressurization of a machine due to a decrease in the elasticity of rubber seals.
Situations indicating that a clogged filter needs to be cleaned:
- after washing or rinsing, the process of draining water is unrealistically slow;
- the machine completes the wash cycle and does not continue it even after the processor is restarted;
- a breakdown code flashes on the monitor, the direct cause of which may be raw water;
- spin or rinse modes do not start.
If such malfunctions in the operation of the washing machine happen often, then it is worth considering the quality of water filtration.
Procedure for cleaning the drain and inlet filter
Initially, all washing machines for their productive and safe operation by the manufacturer have already provided two factory filters:
- jellied (or inlet) - installed immediately after the inlet pipe;
- drain (or outlet), which removes water after washing / rinsing.
We will understand the design and maintenance features of each filter.
Overview of the filler and its service
The inlet filter is mounted at the junction of the inlet hose with the machine. And at the very bottom of the device there is a drain filter, in various models it is located either on the left or on the right and is covered with a special rectangular cover.
Its main function is to detain large and medium debris, which can cause a malfunction or damage to the machine.
The instructions for the washing machine say that to clean the filters you must call a specialist. But if the user is on the “you” with the tools, then he will be able to independently perform these simple actions.
The filler filter is cleaned in all brands and models according to the same principle - it is necessary to carefully remove the device that resembles a thimble, using pliers
First you need to disconnect the device from the network, shut off the water and free access to the back of the device. Be sure to place a piece of a dense rag under the washer floor so that water does not flow in there, and carefully unscrew the water inlet hose.
Then carefully remove the cleaner (it looks like a thimble) using tweezers or pliers. It is necessary to wash the metal mesh of the filter under a stream of warm water, using a toothbrush to remove dirt.
Wipe with a cloth afterwards (do not use a very long pile cloth). After that, install the part in place and screw the hose.
The procedure for cleaning the drain type of filter
A variety of brands of washing devices are slightly different from each other in design, drain cleaners also vary.
In washing machines IndesitFor example, the drain filter is cleaned in this way:
- gently open the panel located on the left or right bottom of the device;
- remove the inside by unscrewing the plug counterclockwise;
- After removing dirt and debris, screw the element tightly clockwise until it stops.
While cleaning the filter of the machine Samsung Be sure to pay attention to the location of the screw handle.
In some models, for tight sealing, it must lock in the correct position. If this is not done, then the water during the washing set will flow out of the drain cleaner.
The filling filter for cleaning water in the washing machine is a small part that must be cleaned at least every 3 months with frequent washing
You can avoid contamination of the drain filter if you follow simple rules for its operation. Rinse the part regularly so that dirt does not accumulate.
If you wash a couple of times a day or 1 time in 2 days, then it is enough to carry out only 1 cleaning in 3 months. In addition, pockets and other indentations in dirty laundry should be carefully checked to prevent dirt, hair and small parts from getting into the drum.
Try to use only proven detergents. And it is better to test new ones with a hand wash, as large particles of powder can only partially dissolve in water and clog the cleaner, especially if the program involves the use of cold water.
Types of cleaning devices
To protect the details of the electrical device from mechanical particles and chemical pollution, users install special water purifiers for the washing machine.
Line Filters. Such devices are installed on a common water supply pipe. The functionality of the main device is similar to a filler cleaner.
It is mounted on the inlet pipe to clean the incoming water from rust, sand and large particles. Please note that this type of filter does not affect the chemical and biological composition of water.
For mounting the main filter, it is necessary to make a separate insert in the pipe. The general cleaner is mounted immediately after the meter and in front of the inlet hose.
The main filter is necessary for deep purification of water from mechanical impurities (dirt, debris, sand), it looks like a flask with an active filler inside
Coarse filter performs functions similar to the main one, and at the same time it is necessarily mounted in front of the washing machine.
Please note that the filters clog quite quickly. Therefore, it is necessary to regularly clean them and replace replaceable cartridges so that the washing machine lasts as long as possible.
Replacing the cartridge of the main cleaner is very simple - just shut off the water, carefully unscrew the flask and put a new cartridge instead of the old
The user can supply a coarse filter for the machine without the help of specialists. You do not need to use any sophisticated tools. It is enough to take a wrench and screw the filter to the machine. The flask is mounted in front of the inlet hose.
To install, do the following:
- Block the water.
- Unscrew the inlet hose from the pipe to which it is attached.
- Install the water filter cleaner in its place.
- Then screw on the hose itself.
The purifier uses a standard thread suitable for pipes at three quarters of an inch. Exactly the same thread is in the hose of the washing machine.
The quality of water treatment will directly depend on the type of filter and how badly the tap water entering the pipes is polluted.
To purify water at a biological level, softener filters are used:
- polyphosphate;
- magnetic.
Devices of this kind remove the notorious stiffness from water, in particular, calcium carbonate salts. Their action is based on chemical or magnetic cleaning methods. Please note that after such filtering, process water will flow through the pipes and cannot be used for drinking.
Features of additional filters
We outline the features of various devices for water purification, describe their operating principle, the specifics of installation, and also find out the effectiveness of the application.
# 1 - polyphosphate cleaning device
A polyphosphate filter is a flask with large, transparent particles similar to salt. It directly affects the biochemical composition of water. Water after cleaning with this filter becomes technical.
The principle of operation is based on the slow passage of fluid through sodium polyphosphate. When its active element reacts with water, it binds carbonates (the base of hardness salts) and closes its path to the heating element and other parts of the washing machine.
Such filters are connected to a pipe with cold water, since at temperatures above +50 ° C the salt itself begins to break down, and in this case there will be no effect from this filter.
From time to time it will be necessary to add polyphosphate to the filter flask, as its components dissolve.
Manufacturers recommend changing the filter-filler if the flask content has decreased by 50% or the container content has not changed for a long time. As practice shows, crystals retain their cleansing functions for six months.
A polyphosphate filter protects the heating element of the washing machine from scale. Remember that after such cleaning, water can only be used for technical needs.
The polyphosphate filler itself can be produced in various forms. Most often it can be seen in the form of translucent granules. Less popular is the powder version, which is produced in the form of pressed white tablets.
Experts recommend using the first option for washers, as it dissolves more efficiently and faster, covering a large area. Sometimes sodium polyphosphate hides under the name "Graham salts."
Subtleties of installing a filter flask
A polyphosphate cleaner is installed in the same way as a deep filter. It should be mounted in front of the machine. Installation and replacement of the active substance of the filter can be dealt with without the help of a specialist.
# 2 - water deferrization filter
The presence of iron does not affect the operation of the washing machine in any way, since the process of iron deferrization occurs at the city's water stations. But what if you live outside the city or in the country?
To get started, do an experiment. Put clean water in a glass jar. Put in a bright place for about 3 days. If after this period the walls are covered with a yellow coating (like rust) and the water has turned a tint of the same color, then iron removal should be carried out.
There is no point in putting such a device for iron removal of water in the country, but residents of country houses need it
In this situation, a special filter is needed - a rather bulky device filled with "green sand". In simple words, the principle of its action is the "transition" of ferrous iron to ferric.
Purpose of installation of a cleaner
Only a specialist should install a deferrization filter. Before installation, a water analysis is required. To install this device, you need to allocate a special place.
# 3 - magnetic type cleaner
The principle of operation of a magnetic filter is based on the influence of a magnetic field on the structure of water in the pipe through which it flows.
In simple words, the cleanser dissolves calcite. It is he who makes the water more rigid and, accordingly, provokes the formation of scale during heating of the heating element.
The magnetic cleaner is mounted directly on the water supply pipe to the machine; it does not require replacing the cartridge
In a natural state, calcite particles adhere to each other, thereby creating chains, therefore a substance precipitates on the machine parts.
The magnetic field breaks these bonds and therefore the water purified by such a filter is really softer. And the scum that has already stuck to the walls of the machine breaks up and its particles, falling into the water, lose the ability to re-settle on the surface.
That is why treated water has the property of freeing the walls of the washing machine from various other precipitations. Washing in such water will require less detergent, and the filter itself does not need to be cleaned.
Nuances of mounting magnetic filters
Some models of magnetic cleaners consist of 2 elements that are mounted directly on top of the pipe through which water is supplied to the machine. Both parts of the magnetic filter are fastened together with screws.
What to look for when choosing?
If water in the tap with visible impurities precipitating, it is advisable to install a common main cleaner.
When this is not possible, the filter should be installed directly in front of the washing machine.
If you are confident in the rigidity of tap water, then it makes sense to install polyphosphate (economical option) or magnetic purifiers (a more expensive purchase)
If in doubt, do you need a softening filter for water, then order a laboratory test. It will show the chemical composition and level of hardness. Based on this data, decide which cleaner to purchase.
To find out the hardness of water at home, you need to conduct an elementary experiment. To do this, lather your hands or a small rag with household soap (72%) and rub them.
If lush foam is formed, then the water is soft and the filter is not needed, otherwise you should consider installing a softener.
If you intend to independently clean or install filters, it is better to analyze the experience of other users in advance by watching small, but informative videos.
Video help for those who want to clean the filter in the car on their own:
Detailed consultation on the selection and proper installation of the main cleaner for washing:
What is the main privilege of a polyphosphate filter for softening water, how does it work? You will find answers to all questions in the video consultation:
The choice of degree of protection, of course, is yours. However, experts believe that Two filters will provide complete protection for the washing machine: one for cleaning from dirt, sand, rust, and the second for softening the water.Such a tandem will extend the century of expensive equipment and save owners time and money.
And which filter did you choose to protect the washing machine? Or maybe you refused to use an additional treatment device? We look forward to your comments, questions and advice on the selection and installation of the filtering device - the contact form is located below.